UVC LED 222nm Chip Far UVC LED 222nm
video
UVC LED 222nm Chip Far UVC LED 222nm

UVC LED 222nm Chip Far UVC LED 222nm

222nm far UVC LED for sterilization and disinfection

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

We provide professional high-quality far uvc led 222nm chips, which are suitable for sterilization and disinfection in various occasions, and the sterilization rate is as high as 99.9%. In addition, a number of studies have confirmed that uvc led 222nm chips are harmless to the human body, so don't worry about the problem that UVC will harm the human body in the past.

 

Features

1. RoHS compliant

2. High reliability packaging energy stabilization

3. High absorption, low penetration into human skin

4. High quality packaging imported from Germany

 

product-750-470

 

 

Package Dimensions

 

product-750-763

 

 

 

Electrical/Optical Characteristics (At TA=25°C)

 

Parameter

Symbol

Conditions

Min.

Avg.

Max.

Units

Radiant Flux

MW

IF=200MA

1

1.5

3

MW

Peak Wavelength

TC/WD

IF=200mA

230nm

235nm

238nm

NM

Forward Voltage

VF

IF=200mA

8

12

13

V

Half wave width

(Δλ)

IF=200mA

10

15

NM

Reverse Current

IR

VR=5V

− −

-10-

μA

Viewing Angle

2Θ1/2

IF=200mA

− −

110

− −

Deg

 

 

 

 

Absolute Maximum Rating(At TA=25°C)UK

 

Parameter

Symbol

Ratings

Units

Power Dissipation

PD

1.5

Continuous Forward Current

IF

200

mA

LED Junction Temperature

TJ

90

°C

Reverse Voltage

VR

20

V

Operating Temperature Range

TOPR

0°C To ~+60°C

Storage Temperature Range

TSTG

-40°C To ~+85°C

Manual Solding Temperature

TSOL

170-260°C For 6~10 Seconds

ESD Sensitivity

ESD

4000V HBM

 

 

 

Characteristic Curves (Ta = 20 ℃)

 

product-750-243

 

product-750-265

 

product-750-256

 

 

 

 

The 222nm far-ultraviolet LED chip can be flexibly mounted on different products, which adds disinfection and sterilization functions to the product. In addition, it also has the characteristics of small size, high efficiency and no pollution, which is suitable for family and commercial use.

 

Applications

1. Disinfection

2. Sensor light

3. Fluorescent spectroscopy

4. Industrial gas and chemical monitoring

5. UV light communication

6. Efficient airborne pollution elimination

7. Spectral analysis instrument

 

product-750-854

Advantages of UVC LED in water purification

With the improvement of people's living standards, people's awareness of healthy water is also gradually increasing. Water is an indispensable resource for life, so good sterilization and purification methods are needed to ensure that we can drink healthy drinking water. From the past to the present, people have also used many methods, mainly divided into physical methods and chemical methods. For example: physical methods include high-temperature boiling, burning, high-pressure steam, etc., and chemical methods include chlorine gas, ozone, etc.

Chlorine disinfection will form a chlorine compound in water, which is a carcinogen, and there will be a smell when the concentration of chlorine is high. If you drink raw water, you will obviously smell this strange smell.

Ozone is another common water sterilization method, and it also has a strong bactericidal effect. But if its concentration is too high, the time of ozone decomposition will be prolonged. Undecomposed ozone not only smells bad but also is an invisible killer, which is very harmful to human respiratory tract, nervous system and immune system.

Although there are many ways to sterilize and disinfect, there are many uncertainties in the efficiency of sterilizing and disinfecting, and there will be secondary pollution and safety problems, so some methods are gradually discontinued.

The far UVC LED 222nm sterilization technology is currently an ideal method of sterilization and disinfection. It uses the strong sterilization function of ultraviolet rays, and the sterilization is fast and efficient. The sterilization process will not produce secondary pollution, and there is no potential safety hazard.

At present, water purification devices in the market generally only have traditional mechanical filters, but a typical complete filter device should have a multi-layer structure, including a UV sterilizing light source and a traditional mechanical filter. Traditional mechanical filter layers and activated carbon layers are mainly used to remove solid impurities and other impurities with bad odors. The UVC germicidal light source only needs to be integrated in the traditional filter device to achieve the effect of sterilization and disinfection.

The use of UVC LED 222nm can not only sterilize efficiently, but also is the most efficient and energy-saving water sterilization technology. It will be recognized by more people in the future, and the scope of use will be wider.

 

 

 

 

 

 

Hot Tags: uvc led 222nm chip far uvc led 222nm, China, suppliers, manufacturers, factory, customized, wholesale, bulk, pricelist, in stock, for sale

You Might Also Like

(0/10)

clearall