Introduction of three kinds of ultraviolet lamps

Introduction of three kinds of ultraviolet lamps

1. High frequency ultraviolet lamp. The inner recess of the lamp tube forms a cavity that can accommodate the electromagnetic induction coil, and the electromagnetic induction coil is located in the cavity. The structural design of the utility model is reasonable, and the lamp tube is no longer a ring structure, but is concave to form a cavity to accommodate the electromagnetic induction coil, which simplifies the process and reduces the production cost.

2. UV lamp for aquarium. The lamp tube is sleeved with a quartz glass shield, and an electrical part connected with the amalgam ultraviolet lamp tube is also arranged in the quartz glass shield, which is connected with the electronic ballast, and a waterproof silicone rubber plug is also arranged at one end of the quartz glass shield.

3. Long tube ultraviolet lamp with electric heat generator. The electric heating body is made of electric heating wires, and is arranged on the lamp tube through the winding of the lamp tube or the sealed fine glass tube arranged in the lamp tube. After adopting the technical proposal, the long tube ultraviolet lamp tube can be heated when used, which is helpful for the lamp tube to start up and operate smoothly, and is not easy to damage the ballast, but also prolongs the service life of the lamp tube, and effectively overcomes the defects of the existing technology.